Hasco Components | Products
Reed Relays
Hasco's Reed Relays use the highest quality reed switches. Reed Relays are ideal to switch to low current for extremely long life. Our Reed Relays can also sit idle for years and not have any contact resistance build up.
Click here to find out more about Hasco's Reed Relays »
Electromechanical Relays
Hasco Component's electromechanical relays range from less than an amp to 80 amps. Hasco's relays are UL and CSA with some TUV ratings. All relays have DC coils and many have an AC coil. They come sealed for wave soldering and washing thereby allowing the relays to be put on any assembly line. There are surface mount low current relays available as well.
Click here to find out more about Hasco's Electromechanical Relays »
Reed Switches
A Reed Switch is a simple, electronic, switching device that uses two pieces of wire to create a Form A style or three pieces of wire to create a Form C. Hasco's reed switch blades are specially produced and sealed in a glass tube and then placed in an inert gas. The advantage of using Hasco's brand is that you are unlikely to come across any contact resistance build-up over years of use or more important “non-use” because the blades are sealed off from outside elements.
Click here to find out more about Hasco's Reed Switches / Magnets »
Proximity Reed Switches
1984 saw the birth of the Alarm Contact Division of Tane Services Inc. known as Tane Alarm Products. Tane uses the finest deactivated RHODIUM reeds made today to insure long life and no sticking. Hasco contacts have been tested to go over 400,000,000 cycles; more important, they are able to sit still for years in an unused door and operate that one critical time.
Click here to find out more about Hasco's Proximity Reed Switches »
